If you have a layout but haven’t thoroughly tested it, I’d still like to see it - feel free to shoot me a direct message.
I’ve got a layout using the other kind of board (sorry, I forget the name) where rows aren’t connected and you make all the connections. It had more outputs than I need/want so I started to remove stuff and transfer over to stripboard but it was difficult for me. Need to spend some more time with it I think.
On another note, being new here I’m not 100% sure if this is legit or if the builder should post, but could be useful for people like me who just scroll this sub looking for stuff they want to build.
I did the slew limiter in the attached layout a couple days ago and it works great! Initial post is here:
Need to clean up my wires, I did it up originally with a Mutable Instruments Ripples front panel I had and left wires long for when I changed things. Just made a layout and had someone cut it out of acrylic for me, shown in the last picture.
Here is a stripboard layout for the AI006 Stomp Box Adapter. The board is only $10 so I recommend buying one straight from Abe if you can, but I found the super-skinny Eurorack board was difficult to mount on my Kosmo panels, and I also wanted to add a bypass switch, which I’ve done here. Be advised that my version is missing the reverse power protection resistors as well as some power filter caps I thought I could get away without.
This layout reflects the way I like my modules - knobs up top, jack sockets down below. The board should be thin enough to hide behind the panel. Hope this helps somebody. This feels a little pirate-ey, so I encourage you to support AI Synthesis wherever possible!
Slow build as usual but here’s another version panning mixer based on mfos super simple schematic . 4 inputs , repeat the layout for each input. Most resistors are panel mounted this time …don’t know if that saves time…check out the detail.
Only had 10k pots in my box , I used them for panning ,for now its ok
Yes sub mixing and panning in the rack is a useful asset and makes the most use of a small desk mixer👌
StripboardCAD for the ipad . I think its still available . Basic tools , but has been of great use to me .
Yes, it is absolutely useful.
It will help me to have more control in sending a good stereo image to my recorder.
I found the app, it’s still available on the apple store, but I can’t use it on the latest ios. It’s a shame, I had been excited about the possibility of working with a mobile app.
Shame about the ios …thats Why I dont Necessarily upgrade my devices … or get an older Ipad ?
Theres always layout creator for the pc not sure about mac. Anyway defo a handy tool if you are thinking of going schematic to stripboard.
I have two devices. The newest one has the latest version of ios.
The oldest has an older version than required by the app and cannot be updated.
I use DIYLC for desktop, but I would like to have an app to use on ios, just for mobility.
I’ll try to get a device with compatible ios for the app, it shouldn’t be difficult.
By the way, thanks for the works you share on your youtube channel, it’s a very precious source of information.
All the best.
Interesting, although I believe it violates the letter of the MIDI spec. Does it still work if the input jack’s shield and pin 2 are not connected to “ground”? Grounding them is something you officially are not supposed to do. But maybe that, and the lack of an optoisolator, do not matter functionally if all you’re connecting to is MIDI outputs.
I have had absolutely zero problems sending midi note info to five hardware synths , that I can assure you. Yes there is apparently some violation tut tut , but this is from a phil rees design who still has Knowledable archived articles on midi and a portfolio of 90s2000s midi devices .
Havent tried grounding options as you suggested …well it works as is.
As you can see i have the original v4 and this layout replicates the flawless functionality
Therefor I still recommend this build