The UNVERIFIED Stripboard Lounge

Just posting my work on Otem Relliks Teensy 3.2 Drum ModuleV2 (which is on This thread)

Im looking for some input on if ive done this right. have i missed any traces or anything silly?

Otems DrumV2 schem:

My Perfboard layout:

The jacks will have the resistors on the front board (10k, 100k 220)
Some of the wiring will be underboard (such as the +5 for the lower MCP6004)
The slashed jumpers could be solder bridges underboard too

Theres still space for the jumpers to the teensy but visibility is the focus for now =D
Also, There is still space for improvement too.

TYIA.

1 Like