Show me your mixers!

[Caustic]

I did a combo mixer and multiple.

My build progress

Here’s the completed mixer / buffered multiple: [IMG_20200326_013634] The cigar box wood works fine, the rigidity is perfectly fine. I reinforced the corners with hot glue so they shouldnt split because they are a corrugation situation.

It looks very jank, and it is, but it gets both jobs done!

I also made a thread a while back about the super simple mixer if you are interested.

LMNC Super Simple Mixer [Strip Board Layout + BOM]

Layout credit: LMNC (Sam Battle) Transcription of instructions: CGS dc mixer in its simplest form basically. I use this circuit in many things. Including the bruel and kjaer fixed filter bank, who’s video I made this strip-board layout for. Remember if you are using a plastic panel, make sure to ground all jack sockets Potentiometers are facing up. Pin 2 of the TL072 is where all the inputs go into, you can actually have as many inputs as you want (in the bruel and kjaer fixed filter bank video…