It’s been nearly five months that I haven’t built anything as I was busy, but I managed to find some time for the following.
- I finally found the parts that I had misplaced and built a second power supply to run in parallel with a hefty 2.5A AC/AC transformer that I bought some time ago. A 2.5A slow blow fuse did the trick with all the inrush current that I had troubles with in the past, so now I think that I got plenty of juice to fill the rest of the case. I also tidied up a little the spagetti of power cables at the back (a mix of JST-XH and the regular 10 pin box connectors).
- I resolved all the issues I had with several modules, most notably the David Haillant VCA where I had a bad LM13700.
- I did some module maintenace, cleaned the flux I had forgotten about and hot-glued the boards to the panels in cases they were wonky.
And finally, with the addition of the Chaos module I am officially half-way through the 150cm case. 