My build progress

[fredrik]

Caustic did a detailed writeup here:

DIY Front Panels with PCB

Hi folks, I figured I would document my experiences with using PCB fabrication sites like JLCPCB. First, i had no clue where to start, not having any CAD software or anything. I settled on using EasyEDA since it interfaces with these PCB sites directly, but you can use others. This CAD software will generate a Gerber file, which is uploaded to the site for them to make for you. Here is a screen cap of my finished VCO panel I made in the CAD program: [image] And here is a pic of the finishe…