mine came today too! but too lazy to take a pic atm lol
Pots from thonk for the TWIN-T arrived sooner than expected.
Ok, this should keep me covered for a bit
Once again, the things I wanted to build this weekend past show up on a Monday.
They’re so I can breadboard a ring modulator prototype - probably based on this one:
I’ve got enough boards/ICs to make ten, so I’ll probably have a few spares - let me know if you’re interested.
Shrouded headers, the latest from the Oh Look I’m Almost Out Of Those Resistor of the Month Club, some reed switches, and ten LM13700s for some reason.
i ordered an ebay Polyester assorted cap kit , turned up yesterday 100 100nf caps no assortment what so ever
Can’t see me ever using 100 of these…
Pay for them with 100 assorted US pennies
Oh, that’s easy. Series/Parallel Approximator - North Coast Synthesis Ltd. and set “Preferred value series” to E1. Where it says 10 nF use ten in series, for 1 uF use ten in parallel.
The letter M is “milli” for capacitors and inductors, “mega” for resistors. Case insensitive…
Got my final order with my ADSR and MegaDrone Panels, plus my museum shirt
BUT im missing the Kosmo pin and I’m assuming it was lost in shipping with the open sided box. Not sure what to do about that. anyone?
contact firstname.lastname@example.org They are good about resolving issues.
Sam had a good timing when drawing the 13700 on the shirt …
Just in time for the weekend JLC order arrived today. This is a big step forward in my polysynth endeavors: PCBs with 8x VCAs, 8x ADSRs, multiplexer, mixer and control boards. I hope it will work without too much fiddling around.
Next is a board with 8x VCFs. I’m currently adding voltage controlled resonance to a Steiner diode ladder filter. This is needed to control all filters at once. We’ll see.
I’m waiting for a big order from tayada (more than 2K!!!)
but today a CD4011AE, 4 x CA3080, some wire and switch
Not in the pic but there was also a 100mh inductor (for Twin T drum).
When i made my order, i buy the switch with little red cap on the toggle, and they send me another type without this plastic cap.
I make a mail and they send me today 25 new switch with cap
Me having not done any workshop labor that wasn’t strictly monitored contemplates making panels with the holes in the right places: oy!
-Fumu / Esopus
Hey those look familiar! Glad they arrived in good shape