DIY power cables - did I choose right parts?

[Caustic]

Here’s a link to my post on the cheap components thread. Among it I have links to ribbon cables.

Cheap Component Search

Hey all, I took some time and collected links of common components used in these projects. Tayda lets you group Favorited components so you can just add a bunch of items to the cart at once. Good for stuff you run out of a lot like jacks and pots. 6.35mm jacks 6.35MM 1/4" STEREO PHONE JACK $0.45 £0.35 Molex / Wafer Connector bits (Image lies, check the details to be sure you get the right pins you need. You will also want a crimper.) WAFER CONNECTOR 2.54MM 4 PINS $0.04 £0.031 HOUSI…

What I do is I do 16 to 10 pin with a 10 ribbon. That’s because I’m using a 10 pin box header for my modules and a 16 pin box header for my diy power supply. Frequency Central makes a dandy pcb for a power supply, and Sam did a video on it! Below is a Bom and everything if you are interested.

FREQUENCY CENTRAL Microbus (Power Supply) [BOM]

Hey everyone, This is to detail what you need to build the Microbus. The build doc’s BOM is nearly identical to what i will provide, and @lookmumnocomputer has a wonderful build video that covers the process. There is also a builders livestream as well. The video shows the smaller version, but its basically the same thing, only a bit more to do. Sam’s Video: Builder Livestream: https://www.patreon.com/posts/fc-power-diy-27556693 Here is the build doc from the frequency central website: …

I just realized that your icon is twilight sparkle.