BIG BUTTON DIY build - Verified???

[Caustic]

Please post what rotary switch you bought, I have heard “make-before-break” or a “break-before-make” can make a difference.

Dont worry if you dont have it, @antoine.pasde2 commented that it shouldn’t matter much, they know what they are talking about.

@antoine.pasde2

I don’t think make-before-break or break-before-make matters here, in either case there will be a glitch in frequency when you turn the switch. If I had to choose, I’d take the break before make in this case as the glitch might be smaller (shorting two adjacent resistors in the divider vs having the opamp input float).

I just want to follow up and see for BOM reasons.