AS3340 VCO Question

[Caustic]

no need to cross post

Question about 3340 VCO module

[circuit 1] [circuit 2] [circuit 3] [CEM 3340 Stripboard (1)] Hi, So here are a few pictures of the stripboard circuit for the VCO, which I had issues with (read above in thread), hopefully are reasonably clear. Just hoping someone could suggest what could be the problem for why the pitch is high from the module. I am a beginner, so I don’t know if capacitors and resistors need to be placed a certain way round on the board or the trimpot is the wrong way round??? not sure but hoping for some …