Adding sync to 1145 stripboard layout

Hi guys this is my first post, i was wondering if there is a way to add a sync cv to this kosmo stripboard?
i want to know if this is possible and if it is could someone please put it in stripboard layout. thank you :slight_smile:


Welcome to the forum :slight_smile:
yes it’s possible, i do it

you need to add this part of the schem

here’s my stripboard layout with add of several options


Thank you so much for your help I really appreciate it, I think I understand the stripboard, I’ll let you know when I work on building it! :slight_smile:

1 Like

Some here had some synchronization problem (including me), if so try this

“A note, the switch to engage the sync only works when the Dist pot is at 10, then I can adjust it but to engage the sync it must be fully, a little strange but it is enough to know”

in this thread