Totally unrelated , but still trying to work out Sams mini ramp

1

I am still intrigued by Sam @lookmumnocomputer mini service ramp. But i needed something to do various work on various cars. So bought a set of seesaw display ramps for £300 . Got my mx5 on them ( little scary ) to clean uf surface rust on subframes. Found a poorly previous sill patch, so had to admit my 20 year old Mig welder was rubbish so bought a new one, that’s my end of year bonus now blown…

DSC_9809
DSC_98091920×3413 785 KB

The Mazda is being prepped for sale, ( its summer and ideal sellibg time)

This is my new daily , it needs ramp time to look at a gearbox issue :frowning:

DSC_9737
DSC_97371920×1080 366 KB

There’s a line of things I need to do car wise, so with the good weather, my energy needs to focus on them… May delay some synth stuff…

PS. Bought another Yamaha CS2x…

Rob

1 Like
2

Looks like the ramps could easily fall to the side. Is there nothing interconnecting them to make the whole thing more sturdy (I can’t see it in the pictures)?

3

if you look in the picture where the triangle reaches the ground, you will see outriggers going out makes it stable under normal use.

These are used a lot by car dealers to display cars.

Rob