Hello everyone,
It’s my first time posting here, although I always love to see all of your setups and new modules coming to life !
In my eurorack journey, I finally can say I’m proud of what I have achieved and happy to share about it 
It’s been already a few years since I started making my modules, here’s a picture of a few of my first vero boards on the top row (some of which never seemed to work as expected), with faceplates cut in old records and my first attempts of PCB creations (kick and snare from Moritz Klein DIY schematics)…
Now, my fully working setup looks like this :
First row is mainly my drum section : kick, snare, tom, hi-hat.
I have built @analogoutput‘s arduino clock, as eurorack version, my latest build is lmnc Grr VCF (still in revision and for which I might ask a few questions here 1114 Funky Clipping Filter/VCA)…
In the lower row, it’s my synth voice based on Erica Synths DIY bassline, modulator and VCA, an envelope, @ChristianBloch’s Beaks, dreadbox’s echo DIY, nonlinearcircuits’ sloth, a multiple (passive and buffered) and a clock divider (I don’t remember to source of this circuit, made on vero board).
Below is my EDU DIY case, that I use to try and check my newer modules : fully working are my FM drum and drum sequencer (based on Moritz Klein designs again)…
On top of my rack is my MIDI to CV module (Erica Synths DIY) and an old Monacor mixer I tweaked a little.