Help converting schematic to strip board layout

[analogoutput]

DIY Power Supply Thread - Questions and Help

I have a complete DIY solution here that works wonderfully in combination. The bus board is my own design, the PSU is from the internet, but pretty much the same as that of MFOS. I only enlarged the circuit board a bit so that it can also be attached. I can verify both with a clear conscience! [MFOS-ish Wall wart PSU] I can recommend this AC wall wart, it is available in different versions and it is cheap. I use them too. I have the 1A model and so far no problems with almost 20 modules. …