DIY AD/AR - LookMum

[analogoutput]

Some discussion here:

Stripboard Layout - Dual Simple AD - AR Generator

EDIT: I am reasonably sure I’ve got this right, so here is the full stripboard layout to get two LMNC simple AD/AR generators in one module. The long green jumper wire is an optional “normal” output, that should go between the tip switch connections if you have a switching jack. I am building/testing trhe second half now, I’ll correct if there are any mistakes. Please note that there are some quirks with the circuit (whether you go single or double) which are detailed in the comments below. Al…

What are you triggering with?

How are you looking at the output?