2399 triple splashback delay

[fredrik]

What are they there for? I notice every module has them, is it for exactly this reason

Filtering and/or (not very great) fuses and/or “I saw it somewhere”, see here:

Typical module power circuit

Different schools: 10 ohm and capacitor near power header (this basically results in an RC low pass filter, but with a voltage drop over the resistor depending on the current). Usually somewhat pointless (the resistors, not necessarily the capacitors). 10 ohm without capacitors (either using them as fuses, expecting them to die if something’s shorted, or possibly just cargo culting, trying to do the above but forgetting how things work, see “power sins” here for more). Ferrite beads (if done …

In this case they may actually have worked as fuses, but if they burn out odds are you have a problem elsewhere.