I might have made my board, but why not push the limits and learn Kicad on a behemoth of a first schem!!
Hoping to get this made and give it back to Otem Rellik =)
maybe sell some boards too (if hes ok with that)
I’ve had my eye on this module for ages and considered attempting to kicad it, never found the time so very interested to see how yours comes out.
I am far from a kicad expert, but I have copied a few schematics to kicad successfully in the past, so if you need any help I would be happy to contribute.
Ohhh I was gonna wait til the weekend. But I just couldn’t… Sat n soldered for hours stripping off the parts from the proto… Will get round to testing tomorrow.
I tested the power headers, no shorts there. So there’s hope!
Got a few things in my head for MK2. Should add power diodes or 10r. Need to flip the silk for Ecap on -12v, use a smaller footprint for the 7805, shrink the button hole and may be the LEDs too by a mm or so.
But! I’m so happy with it!!
https://www.instagram.com/p/C0P_BMrI43g/?igshid=MzRlODBiNWFlZA==