KOSMO Audiohacker - looking for mistakes/feedback

[fredrik]

@sebastian

For reversal protection, would you replace the 10 ohm resistors with diodes (which?) or would you add diodes to ground?

There’s quite a few options, some better than others:

Typical module power circuit

Different schools: 10 ohm and capacitor near power header (this basically results in an RC low pass filter, but with a voltage drop over the resistor depending on the current). Usually somewhat pointless (the resistors, not necessarily the capacitors). 10 ohm without capacitors (either using them as fuses, expecting them to die if something’s shorted, or possibly just cargo culting, trying to do the above but forgetting how things work, see “power sins” here for more). Ferrite beads (if done …