First pcb prototype attempt

[analogoutput]

(See discussion here)

Screwing it down

One thing I haven’t found mentioned anywhere is the spacing between mounting holes. I think I read that the holes are sized for M3 screws, but I didn’t see the distance between them given. If you’re screwing them into a wood strip it doesn’t matter so much, but there are some advantages to a Eurorack-style rail system; easier to rearrange and you don’t get sawdust everywhere. But for that you need a consistent hole spacing. Edit to add: Is there such a thing as threaded inserts with metric spa…

I hope I got it right on the Mikrokosmos, I still don’t have an LMNC module in my hands to compare!