Arturia/Keystep　CV NOISE

1

Does anyone know the cause of the noise that comes out of CV:GATE in Arturia/Keystep?
I’m connecting Moog/Subharmonicon’s clock out to Moog/DFAM’s clock, sending midi signal from Arturia/Keystep’s CV:GATE to Moog/Subharmonicon’s clock in, and connecting an external modular sound source to Moog/DFAM’s external audio.
When I connect the cable from the CV:GATE of Arturia/Keystep to Moogs, I hear a high frequency noise.

I found a similar question, but my problem could not be solved with that topic.

2

i don’t know the Keystep, but with the Beatstep pro there is a special wire/socket for this sort of problem

1 Like
3

You didn’t say which topic you found that wasn’t helpful. So this one may or may not be.

It does sound like you may have a similar ground loop problem, if so you could try a ground isolator of the kind mentioned there.

2 Likes
4

When I had a similar issue, I had little success with the one provided, but I got one for USB power and it did the job.

1 Like