# Zorch's build progress **URL:** \ **Category:** KOSMO MODULES\ **Created:** [August 5, 2020, 7:02pm UTC](https://lookmumnocomputer.discourse.group/t/zorchs-build-progress/1553 "2020-08-05T19:02:03Z")\ **Posts on this page:** 1\ **Showing post:** 119
**Author:** ![analogoutput](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/analogoutput/32/29663_2.png) [@analogoutput](https://lookmumnocomputer.discourse.group/u/analogoutput)\ **Post date:** [October 10, 2021, 3:08pm UTC](https://lookmumnocomputer.discourse.group/t/zorchs-build-progress/1553/119 "2021-10-10T15:08:47Z")
> [@zorch](#): > > magic smoke from my glide because I am still bad at making power cables > [@Ribbon cable tester](https://lookmumnocomputer.discourse.group/t/ribbon-cable-tester/1600): > > There’s a ribbon cable tester project at [https://github.com/tomarus/cabletester](https://github.com/tomarus/cabletester). I [forked it](https://github.com/holmesrichards/cabletester) and made a PCB for it, with a few minor modifications mostly to do with the ordering of the connections. Seems to work: The intention is for the display to plug into a header on the board but it turns out these displays come in a couple of versions that look identical at first but have different pin ordering. Aside from that they seem entirely compatible. I didn’t notice until af… It works great. My homemade cables have been very reliable (using connectors and cable from Tayda and [this tool](https://smile.amazon.com/Eowpower-Crimp-Ribbon-Cable-Connectors/dp/B072MM8X7Y)) but if there is a problem this will catch it before the chips do. --- _[View the full topic](https://lookmumnocomputer.discourse.group/t/zorchs-build-progress/1553)._