# Verified Stripboard Layouts!

**URL:** <https://lookmumnocomputer.discourse.group/t/verified-stripboard-layouts/81>\
**Category:** DIY STUFF\
**Created:** [January 22, 2020, 6:51pm UTC](https://lookmumnocomputer.discourse.group/t/verified-stripboard-layouts/81 "2020-01-22T18:51:43Z")\
**Posts on this page:** 1\
**Showing post:** 629

<div class="post-metadata">

**Author:** ![K.ostas](https://avatars.discourse-cdn.com/v4/letter/k/ed655f/32.png) [@K.ostas](https://lookmumnocomputer.discourse.group/u/K.ostas)\
**Post date:** [April 14, 2024, 7:09pm UTC](https://lookmumnocomputer.discourse.group/t/verified-stripboard-layouts/81/629 "2024-04-14T19:09:43Z")

</div>

I wanted a buffered multiple with three outputs, so I put together this one, which combines the design of Analog Output [Buffered Multiples](https://analogoutputblog.wordpress.com/2023/03/13/buffered-multiples-again/) (output resistor in the loop) and the +/- voltage indicator from Skulls & Circuits [Buffered Multiple](https://www.skullandcircuits.com/utilities-buffered-multiple/?v=d3dcf429c679). Unless @analogoutput tells me that there is something wrong in combining the resistor in the loop design with the LED indicator of that “spare” op amp, I’ll label this as verified as I’ve built one and works fine as far as I can see.

 ![bufferedmulti](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/3X/8/d/8d92848bafb55837d9fa3c32362752c4cea50813.png)

---

_[View the full topic](https://lookmumnocomputer.discourse.group/t/verified-stripboard-layouts/81)._