# Verified Stripboard Layouts!

**URL:** <https://lookmumnocomputer.discourse.group/t/verified-stripboard-layouts/81>\
**Category:** DIY STUFF\
**Created:** [January 22, 2020, 6:51pm UTC](https://lookmumnocomputer.discourse.group/t/verified-stripboard-layouts/81 "2020-01-22T18:51:43Z")\
**Posts on this page:** 1\
**Showing post:** 622

<div class="post-metadata">

**Author:** ![K.ostas](https://avatars.discourse-cdn.com/v4/letter/k/ed655f/32.png) [@K.ostas](https://lookmumnocomputer.discourse.group/u/K.ostas)\
**Post date:** [March 6, 2024, 9:53am UTC](https://lookmumnocomputer.discourse.group/t/verified-stripboard-layouts/81/622 "2024-03-06T09:53:48Z")

</div>

I haven’t finished the panel yet, but it’s connected and working, so you can consider this verified. I got the idea to make a Boss CE-2 (it’s that famous chorus guitar pedal) LFO from @benjiao who has [his own CE-2 project](https://benjiaomodular.com/post/2022-05-22-ce2-lfo/). My version is closer to the [service manual schematic](https://www.synthxl.com/wp-content/uploads/2019/09/Boss-ce-2-schematics.pdf) with a single triangle out through a 2SC945 transistor buffer and the Depth 1 lug connected to 4.5V. I adjusted the output to get a, roughly 0-5Vpp output, added an LED indicator, and a switch in between the rate capacitors (for which I used sockets to change them if need be). The original called for 100nF, but I found that 47nF and 1μF give a more useful range (@benjiao used 1μF and 10μF). As usual, the stripboard layout is tight and can fit behind a 2.5cm Kosmo panel.

 ![ce2](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/3X/3/e/3e5151e2a898956bf121d32739413037b18e746e.png)

---

_[View the full topic](https://lookmumnocomputer.discourse.group/t/verified-stripboard-layouts/81)._