# Verified Stripboard Layouts! **URL:** \ **Category:** DIY STUFF\ **Created:** [January 22, 2020, 6:51pm UTC](https://lookmumnocomputer.discourse.group/t/verified-stripboard-layouts/81 "2020-01-22T18:51:43Z")\ **Posts on this page:** 1\ **Showing post:** 184
**Author:** ![THOGRE](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/thogre/32/5189_2.png) [@THOGRE](https://lookmumnocomputer.discourse.group/u/THOGRE)\ **Post date:** [July 19, 2020, 6:04pm UTC](https://lookmumnocomputer.discourse.group/t/verified-stripboard-layouts/81/184 "2020-07-19T18:04:15Z")
Maybe someone could verify my Layout? I haven’t tested it yet, but think I didn’t make a mistake, I put the pots on the PCB and added pin header for Eurorack. Would be great if someone from the experienced people could look up. Many thanks. Here is the link > [@Can someone please check my Layout from 3340 VCO?](https://lookmumnocomputer.discourse.group/t/can-someone-please-check-my-layout-from-3340-vco/1473): > > Hi @ everyone! Can someone please check my stripboard layout. I built the pots on the PCB and added a Eurorack like plug. Basically it is Sam’s design or from the alfa4 VCO like most that you can find on the Internet. I haven’t tested it yet and it’s probably not elegant either, but I think it works that way and I didn’t make a mistake. Would be great if one of our professionals could look. Greetings THOGRE --- _[View the full topic](https://lookmumnocomputer.discourse.group/t/verified-stripboard-layouts/81)._