# Valve Distorting Vca Problems

**URL:** <https://lookmumnocomputer.discourse.group/t/valve-distorting-vca-problems/453>\
**Category:** KOSMO MODULES\
**Created:** [March 27, 2020, 12:51pm UTC](https://lookmumnocomputer.discourse.group/t/valve-distorting-vca-problems/453 "2020-03-27T12:51:41Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![sebastian](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/sebastian/32/39_2.png) [@sebastian](https://lookmumnocomputer.discourse.group/u/sebastian)\
**Post date:** [March 29, 2020, 3:14pm UTC](https://lookmumnocomputer.discourse.group/t/valve-distorting-vca-problems/453/7 "2020-03-29T15:14:53Z")

</div>

It works!! Thank you so much!! 🥰  
I put a cap between the output of the valve and the next step (I made a picture)  
Thank you so much!! I used only 100nF, because I could not find a 1uF, can you explain, what this changes?  
And also the bypass switch does not work, but I have to check that again! It only bypasses if I remove the output from the opamp… any ideas?

![valve schematic](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/2X/8/8b2f395cec29c78049fae44aeaecfcb3f80cbe0b.jpeg)

---

_[View the full topic](https://lookmumnocomputer.discourse.group/t/valve-distorting-vca-problems/453)._
