# Useful 3D prints for SDIY and electronics

**URL:** <https://lookmumnocomputer.discourse.group/t/useful-3d-prints-for-sdiy-and-electronics/5429>\
**Category:** DIY STUFF\
**Created:** [September 6, 2022, 11:24pm UTC](https://lookmumnocomputer.discourse.group/t/useful-3d-prints-for-sdiy-and-electronics/5429 "2022-09-06T23:24:17Z")\
**Posts on this page:** 1\
**Showing post:** 22

<div class="post-metadata">

**Author:** ![AriaSalvatrice](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/ariasalvatrice/32/28804_2.png) [@AriaSalvatrice](https://lookmumnocomputer.discourse.group/u/AriaSalvatrice)\
**Post date:** [April 12, 2023, 10:24pm UTC](https://lookmumnocomputer.discourse.group/t/useful-3d-prints-for-sdiy-and-electronics/5429/22 "2023-04-12T22:24:22Z")

</div>

All righties, let’s direct that conversation to the new thread then:

> [@Synth Printer: simple system to create 3D printed front panels in code](https://lookmumnocomputer.discourse.group/t/synth-printer-simple-system-to-create-3d-printed-front-panels-in-code/6086):
>
> UPDATE: The project is now usable, but keeping the OP mostly as-is. Have you seen my 3D printed Kosmo system? [image] Those panels were made in code using [CadQuery](https://github.com/CadQuery/cadquery)! For the 20 panels I’ve made so far, in general I’ve simply been copy-pasting code from previous panels, as they are all simple one-off projects. It’s easy to make a panel like that in less than 5 minutes! But the code is a bit of a handful, so I thought it could be useful to abstract away this stuff in a simple little library for…

---

_[View the full topic](https://lookmumnocomputer.discourse.group/t/useful-3d-prints-for-sdiy-and-electronics/5429)._