# The UNVERIFIED Stripboard Lounge

**URL:** <https://lookmumnocomputer.discourse.group/t/the-unverified-stripboard-lounge/2829>\
**Category:** DIY STUFF\
**Created:** [January 30, 2021, 9:29pm UTC](https://lookmumnocomputer.discourse.group/t/the-unverified-stripboard-lounge/2829 "2021-01-30T21:29:24Z")\
**Posts on this page:** 1\
**Showing post:** 119

<div class="post-metadata">

**Author:** ![willow2x](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/willow2x/32/5343_2.png) [@willow2x](https://lookmumnocomputer.discourse.group/u/willow2x)\
**Post date:** [October 6, 2021, 11:43pm UTC](https://lookmumnocomputer.discourse.group/t/the-unverified-stripboard-lounge/2829/119 "2021-10-06T23:43:59Z")

</div>

Just posting my work on Otem Relliks Teensy 3.2 Drum ModuleV2 (which is on [_This_ thread](https://lookmumnocomputer.discourse.group/t/otemrellik-s-teensy3-2-drumv2-module/4042/9))

Im looking for some input on if ive done this right. have i missed any traces or anything silly?

Otems DrumV2 schem:

 ![Schematic_TeensyDrumsV2](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/3X/e/4/e4d0fb1b129967be9695fc589f72c7993eb78e1f.png)

My Perfboard layout:

 ![OR DrumV2 Possible](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/3X/4/9/49eb43bb16048679d534ae08eccf7d95f874cce9.png)

The jacks will have the resistors on the front board (10k, 100k 220)  
Some of the wiring will be underboard (such as the +5 for the lower MCP6004)  
The slashed jumpers could be solder bridges underboard too

Theres still space for the jumpers to the teensy but visibility is the focus for now =D  
Also, There is still space for improvement too.

TYIA.

---

_[View the full topic](https://lookmumnocomputer.discourse.group/t/the-unverified-stripboard-lounge/2829)._