# The BST Thread (Buy, Sell, Trade)

**URL:** <https://lookmumnocomputer.discourse.group/t/the-bst-thread-buy-sell-trade/1608>\
**Category:** Uncategorized\
**Created:** [August 13, 2020, 4:03pm UTC](https://lookmumnocomputer.discourse.group/t/the-bst-thread-buy-sell-trade/1608 "2020-08-13T16:03:38Z")\
**Posts on this page:** 1\
**Showing post:** 30

<div class="post-metadata">

**Author:** ![analogoutput](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/analogoutput/32/29663_2.png) [@analogoutput](https://lookmumnocomputer.discourse.group/u/analogoutput)\
**Post date:** [September 6, 2020, 12:17pm UTC](https://lookmumnocomputer.discourse.group/t/the-bst-thread-buy-sell-trade/1608/30 "2020-09-06T12:17:36Z")

</div>

> [@eric](#):
>
> @analogoutput Can the Ginkosynthese Grains firmwares be adapted to dac/ino, or is the hardware way too different and would need a complete rewrite ?

Not very familiar with Grains but… I mean, it’s an Arduino Nano, it’ll run the code, input pin assignments might have to be changed but that’s trivial. Question is the analog output. Synapse, the project dac/ino is based upon, was designed for control voltage output, not audio, and I have no idea if the DAC outputs are fast enough for what Grains is trying to do. Maybe you could use PWM — Grains writes PWM to pin 11 which is used in dac/ino to communicate with the DAC but if that can be changed to pin 6 or 9 those are available (one’s buffered and connected to a 2-pin Molex for an output jack, the other connects directly to a header or 8-pin Molex). Looks like Grains uses a hacky alternative to analogWrite and my guess is it can be made to work on pin 6 or 9 but I’m not sure. On Grains the PWM output is connected to a low pass filter, so doing it this way you’d probably want to bodge a resistor-capacitor network onto the output. Or not, the filter can be bypassed on Grains: “Bypassing the filter provides more clarity and a slightly louder output but more artifacts in the sound.”

Well, try it and report back!

_Added:_ @sebastian was messing with a module that could run Grains sketches, apparently it worked but there were tuning issues. Probably a solvable problem. The hardware can be considerably simpler than dac/ino if it’s just running Grains.

> [@Bytebeats Arduino Chiptune module](https://lookmumnocomputer.discourse.group/t/bytebeats-arduino-chiptune-module/438):
>
> Hi, I just set up this little bytebeats machine on my breadboard: [https://www.muffwiggler.com/forum/viewtopic.php?f=17&t=225024](https://www.muffwiggler.com/forum/viewtopic.php?f=17&t=225024) (github with code etc. is [here](https://github.com/spherical-sound-society/glitch-storm)) There is also a good explanation of what is happening [here](https://nightmachines.tv/downloads/Bytebeats_Beginners_Guide_TTNM_v1-5.pdf) It is quite cool, so I am planning to make a more permanent installation and add cv to the knobs, but I was wondering if you have ideas how to make it a little bit more ‘predictable’ or ‘musical’, so I can integrate it a…

---

_[View the full topic](https://lookmumnocomputer.discourse.group/t/the-bst-thread-buy-sell-trade/1608)._
