# Simple Headphone Volume Control **URL:** \ **Category:** DIY STUFF\ **Created:** [November 29, 2020, 6:45am UTC](https://lookmumnocomputer.discourse.group/t/simple-headphone-volume-control/2403 "2020-11-29T06:45:08Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![analogoutput](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/analogoutput/32/29663_2.png) [@analogoutput](https://lookmumnocomputer.discourse.group/u/analogoutput)\ **Post date:** [November 29, 2020, 2:16pm UTC](https://lookmumnocomputer.discourse.group/t/simple-headphone-volume-control/2403/3 "2020-11-29T14:16:14Z")
Here’s the headphone output from the Befaco OutV3: ![image](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/2X/4/4035aeffa48f5555912e3981b0331cef26705369.png) They use an NE5532 which apparently can source more current than TL07x. From the Erica Synths DIY Output: ![image](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/2X/7/793011b086b46a7319e3edf22366053a59b8d9c0.png) Uses a headphone driver chip, LM4808, which however is available only in SMD packages. Barton Stereo Outs: ![image](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/2X/f/f71df9a5c2f31e5194e06c60d1a2c99073bf7bf3.png) This does use a TL0x. I have this board but haven’t built it yet so can’t comment on how it works. YuSynth: ![image](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/2X/6/6ea37f0e1b356fcb56185d7165b4bd5db054d143.png) TL072 and then BC327, BC337 transistors. MusicFromOuterSpace: ![image](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/2X/7/78dc1fbe67dea3084c0b0f6dfcf91d23f4108be7.png) LM386 audio amplifier. Seems there are as many approaches as there are designers… --- _[View the full topic](https://lookmumnocomputer.discourse.group/t/simple-headphone-volume-control/2403)._