# SIMPLE DIY ENVELOPE 2.0 stripboard weirdness **URL:** \ **Category:** KOSMO MODULES\ **Created:** [July 15, 2020, 10:40pm UTC](https://lookmumnocomputer.discourse.group/t/simple-diy-envelope-2-0-stripboard-weirdness/1450 "2020-07-15T22:40:03Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![fredrik](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/fredrik/32/682_2.png) [@fredrik](https://lookmumnocomputer.discourse.group/u/fredrik)\ **Post date:** [July 16, 2020, 1:01pm UTC](https://lookmumnocomputer.discourse.group/t/simple-diy-envelope-2-0-stripboard-weirdness/1450/7 "2020-07-16T13:01:57Z")
Looking at the component values again, all three interpretations in my first post look like slightly mutated versions of CGS24, discussed here: > [@Gate to Trigger](https://lookmumnocomputer.discourse.group/t/gate-to-trigger/1423): > > I thought I may need this so I knocked this quad version of a Gate to trigger up… Nothing outstanding, just could be useful. Don’t think there will be enough space on a 25mm panel to squash all 12 jacks in… ![image](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/2X/b/b39af74dcc311a5b5c79ac2d643c0086e1560aea.jpeg) (the wire going upwards is 100k to +15V) Except that it’s used for trigger to gate here, not gate to trigger 🙂 (But all these circuits are crazy imprecise, since they depend on the trigger voltage, which isn’t exactly standardized. See [here](https://lookmumnocomputer.discourse.group/t/stripboard-layout-dual-simple-ad-ar-generator/1107/16) for a bit more on that.) --- _[View the full topic](https://lookmumnocomputer.discourse.group/t/simple-diy-envelope-2-0-stripboard-weirdness/1450)._