# Problems with the stripboard Lp vcf layout

**URL:** <https://lookmumnocomputer.discourse.group/t/problems-with-the-stripboard-lp-vcf-layout/510>\
**Category:** DIY STUFF\
**Created:** [April 2, 2020, 7:54pm UTC](https://lookmumnocomputer.discourse.group/t/problems-with-the-stripboard-lp-vcf-layout/510 "2020-04-02T19:54:43Z")\
**Posts on this page:** 1\
**Showing post:** 21

<div class="post-metadata">

**Author:** ![casiokid](https://avatars.discourse-cdn.com/v4/letter/c/34f0e0/32.png) [@casiokid](https://lookmumnocomputer.discourse.group/u/casiokid)\
**Post date:** [April 18, 2020, 6:17am UTC](https://lookmumnocomputer.discourse.group/t/problems-with-the-stripboard-lp-vcf-layout/510/21 "2020-04-18T06:17:01Z")

</div>

I also just built this same filter and have the same low volume issue. It’s significantly lower…

I haven’t tried using it passively yet, but were you able to figure out your low volume issue?

---

_[View the full topic](https://lookmumnocomputer.discourse.group/t/problems-with-the-stripboard-lp-vcf-layout/510)._