# Panel labeling and decorating techniques **URL:** \ **Category:** FAQ\ **Created:** [August 5, 2020, 1:28pm UTC](https://lookmumnocomputer.discourse.group/t/panel-labeling-and-decorating-techniques/1550 "2020-08-05T13:28:50Z")\ **Posts on this page:** 1\ **Showing post:** 18
**Author:** ![Sonosus](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/sonosus/32/13679_2.png) [@Sonosus](https://lookmumnocomputer.discourse.group/u/Sonosus)\ **Post date:** [December 27, 2022, 12:11pm UTC](https://lookmumnocomputer.discourse.group/t/panel-labeling-and-decorating-techniques/1550/18 "2022-12-27T12:11:26Z")
@Jos posted his method of laser cutting panels here: > [@Sculpt-O-Sound wooden front panel howto](https://lookmumnocomputer.discourse.group/t/sculpt-o-sound-wooden-front-panel-howto/5792): > > Some time ago I promised @AriaSalvatrice and others that I would explain a bit how I make the wooden front panels for my modules. As I was making another module I therefor took a few extra pictures to illustrate the process. I’ve been drawing circuits in EasyEda for a while now and when it comes to designing a module I often split the circuit in 2 parts. One part will contain the main circuitry and the other will contain all inputs, outputs, switches and pots. The latter PCB is the one that def… --- _[View the full topic](https://lookmumnocomputer.discourse.group/t/panel-labeling-and-decorating-techniques/1550)._