# My build progress

**URL:** <https://lookmumnocomputer.discourse.group/t/my-build-progress/345>\
**Category:** DIY STUFF\
**Created:** [March 1, 2020, 8:57pm UTC](https://lookmumnocomputer.discourse.group/t/my-build-progress/345 "2020-03-01T20:57:53Z")\
**Posts on this page:** 1\
**Showing post:** 960

<div class="post-metadata">

**Author:** ![binarymob](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/binarymob/32/5062_2.png) [@binarymob](https://lookmumnocomputer.discourse.group/u/binarymob)\
**Post date:** [August 2, 2020, 10:48pm UTC](https://lookmumnocomputer.discourse.group/t/my-build-progress/345/960 "2020-08-02T22:48:20Z")

</div>

Hello Friends.

 ![20200802_182710](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/2X/d/dc73d9aa1aa43668a83106f39b7942ec3fe2e76a.jpeg)  
I finally got around to working on a panel for my first module AS3340. A local sign shop was nice enough to give me some of their scrap 1mm aluminum panel. There is a bit of flex in it but should be plenty sturdy when I get it into the yet to be built case.

I had a go at a toner transfer process for the design using plain old glossy magazine paper. It’s a super dodgy transfer but considering it cost nothing I’m fine with it. I’ll probably design around an eroded/disintegrated aesthetic. Features not bugs.

---

_[View the full topic](https://lookmumnocomputer.discourse.group/t/my-build-progress/345)._