# My build progress

**URL:** <https://lookmumnocomputer.discourse.group/t/my-build-progress/345>\
**Category:** DIY STUFF\
**Created:** [March 1, 2020, 8:57pm UTC](https://lookmumnocomputer.discourse.group/t/my-build-progress/345 "2020-03-01T20:57:53Z")\
**Posts on this page:** 1\
**Showing post:** 6200

<div class="post-metadata">

**Author:** ![AriaSalvatrice](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/ariasalvatrice/32/28804_2.png) [@AriaSalvatrice](https://lookmumnocomputer.discourse.group/u/AriaSalvatrice)\
**Post date:** [December 15, 2023, 8:55pm UTC](https://lookmumnocomputer.discourse.group/t/my-build-progress/345/6200 "2023-12-15T20:55:00Z")

</div>

After a lot of printing, I’m done moving all my jacks to 3D printed nuts (and took the opportunity to change other widgets to make every module now have two colors)

Whites are outputs, anything else is an input.

 ![](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/3X/8/6/864e6d8ad260e4060108fdc2c47b7c1edeae5df0.jpeg)  
See also:

> [@Where to source nuts for 1/4 jacks in various colors?](https://lookmumnocomputer.discourse.group/t/where-to-source-nuts-for-1-4-jacks-in-various-colors/6261/):
>
> While I have no plans to add labels to my synth, I could use color-coding on the outputs by using black nuts, but the standards for the sizing of nuts are nuts Best I can guess, the noname jacks I have probably use the “3/8-32UNEF-2B” standard, whatever that means. Do I have some wiggle room on this? M6 nuts seem pretty close, would they do the trick? Two additional things: Customs don’t screw around in my country. Buying outside the EU means huge fees even on small orders. If yo…

---

_[View the full topic](https://lookmumnocomputer.discourse.group/t/my-build-progress/345)._