# My build progress **URL:** \ **Category:** DIY STUFF\ **Created:** [March 1, 2020, 8:57pm UTC](https://lookmumnocomputer.discourse.group/t/my-build-progress/345 "2020-03-01T20:57:53Z")\ **Posts on this page:** 1\ **Showing post:** 5652
**Author:** ![Bpbby](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/bpbby/32/15259_2.png) [@Bpbby](https://lookmumnocomputer.discourse.group/u/Bpbby)\ **Post date:** [February 18, 2023, 9:11pm UTC](https://lookmumnocomputer.discourse.group/t/my-build-progress/345/5652 "2023-02-18T21:11:56Z")
Just finished the VDCO from electroDruid, following the manual from the website and the very good advices from @EddyBergman website. (I am taking a long break from my [DFAM clone / LMND](https://lookmumnocomputer.discourse.group/t/dfam-clone-lmnd/5015)) It is a bit noisy, nothing that would stop me from using. It wasnt as bad while i was tuning it but then the 2 boards were further apart. But now that they are stacked together it is audibleā€¦ but i have also added a mixer (for the osc and sub osc) with distortion so actually, more noise is bestšŸ¤˜. ![20230218_202026](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/3X/8/4/849338e496076033accb531f08c350d3291ce204.jpeg) ![20230218_202040](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/3X/a/b/ab80a531d24df0286142034776b064db0d7b282b.jpeg) ![20230218_205627](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/3X/b/3/b365c9d08573d8fc04fa1e7aa20ad15cc5b25bd6.jpeg) Planning on finally doing the triple splashback, along with a dual lfo, VCA and Env Generator to fill the updated case. ![20230218_205703](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/3X/c/4/c4a9887aa3b9c21f0ada5ad019442f1ef4df276c.jpeg) --- _[View the full topic](https://lookmumnocomputer.discourse.group/t/my-build-progress/345)._