# My build progress **URL:** \ **Category:** DIY STUFF\ **Created:** [March 1, 2020, 8:57pm UTC](https://lookmumnocomputer.discourse.group/t/my-build-progress/345 "2020-03-01T20:57:53Z")\ **Posts on this page:** 1\ **Showing post:** 4523
**Author:** ![analogoutput](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/analogoutput/32/29663_2.png) [@analogoutput](https://lookmumnocomputer.discourse.group/u/analogoutput)\ **Post date:** [February 8, 2022, 5:12pm UTC](https://lookmumnocomputer.discourse.group/t/my-build-progress/345/4523 "2022-02-08T17:12:54Z")
Replaced the interface box on my ribbon controller, the project that launched my synth DIY activity these past 3 years. The original was a rather dodgy build on proto board and used someone else’s code which I didn’t like. New version uses a [dac/ino lite](https://lookmumnocomputer.discourse.group/t/ao-dac-ino/1035) PCB and uses my own code which no one else will like. The jacks I used for the outputs turned out to be really crappy ones (cheap! but crappy!) so I think I won’t bother to close up the box until I get around to buying some better ones. ![PXL_20220208_162132206_resized](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/3X/5/3/533fbb2693a1d1e900d8bc369513f532dee072fa.jpeg) ![PXL_20220208_162414954_resized](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/3X/c/6/c685879a38c978f693e8d79631915c4215cc0208.jpeg) --- _[View the full topic](https://lookmumnocomputer.discourse.group/t/my-build-progress/345)._