# My build progress

**URL:** <https://lookmumnocomputer.discourse.group/t/my-build-progress/345>\
**Category:** DIY STUFF\
**Created:** [March 1, 2020, 8:57pm UTC](https://lookmumnocomputer.discourse.group/t/my-build-progress/345 "2020-03-01T20:57:53Z")\
**Posts on this page:** 1\
**Showing post:** 3794

<div class="post-metadata">

**Author:** ![Dud](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/dud/32/610_2.png) [@Dud](https://lookmumnocomputer.discourse.group/u/Dud)\
**Post date:** [September 2, 2021, 11:00am UTC](https://lookmumnocomputer.discourse.group/t/my-build-progress/345/3794 "2021-09-02T11:00:03Z")

</div>

Yes it’s with CD4017, base on Baby 10 old schematic + some add

here’s the thread about it 😉

> [@Baby 8 step sequencer schematic](https://lookmumnocomputer.discourse.group/t/baby-8-step-sequencer-schematic/2441):
>
> I try to make schem for an old school Baby 8 seq with a CD4017, with some mix of several schem, and i’m not sure that my mix holds the road . with some on/off/on switch you can on each step select, on/off cv & gate out or choose this step as reset step. i use this part of schem for the external clock in, but only the up part (not the gate to trigger one) and i don’t really know what doing with the pin 2 of opamp, in my schem i only connect it to 100k then +12V here’s my test on…

---

_[View the full topic](https://lookmumnocomputer.discourse.group/t/my-build-progress/345)._