# My build progress **URL:** \ **Category:** DIY STUFF\ **Created:** [March 1, 2020, 8:57pm UTC](https://lookmumnocomputer.discourse.group/t/my-build-progress/345 "2020-03-01T20:57:53Z")\ **Posts on this page:** 1\ **Showing post:** 24
**Author:** ![fredrik](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/fredrik/32/682_2.png) [@fredrik](https://lookmumnocomputer.discourse.group/u/fredrik)\ **Post date:** [March 5, 2020, 4:38am UTC](https://lookmumnocomputer.discourse.group/t/my-build-progress/345/24 "2020-03-05T04:38:21Z")
Caustic did a detailed writeup here: > [@DIY Front Panels with PCB](https://lookmumnocomputer.discourse.group/t/diy-front-panels-with-pcb/121): > > Hi folks, I figured I would document my experiences with using PCB fabrication sites like JLCPCB. First, i had no clue where to start, not having any CAD software or anything. I settled on using EasyEDA since it interfaces with these PCB sites directly, but you can use others. This CAD software will generate a Gerber file, which is uploaded to the site for them to make for you. Here is a screen cap of my finished VCO panel I made in the CAD program: And here is a pic of the finishe… --- _[View the full topic](https://lookmumnocomputer.discourse.group/t/my-build-progress/345)._