# Multiple/Buffered

**URL:** <https://lookmumnocomputer.discourse.group/t/multiple-buffered/3468>\
**Category:** DIY STUFF\
**Created:** [May 2, 2021, 6:02pm UTC](https://lookmumnocomputer.discourse.group/t/multiple-buffered/3468 "2021-05-02T18:02:57Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![bymccoy](https://avatars.discourse-cdn.com/v4/letter/b/54ee81/32.png) [@bymccoy](https://lookmumnocomputer.discourse.group/u/bymccoy)\
**Post date:** [May 2, 2021, 6:02pm UTC](https://lookmumnocomputer.discourse.group/t/multiple-buffered/3468/1 "2021-05-02T18:02:57Z")

</div>

Hi

After multiples for my Eurorack, and wanting a good circuit for a buffered mult. There’s a lot of “noise” when you search for them, so looking for advice.

I wouldn’t mind a bank of mults that I can break into smaller groups, but think they should be buffered, as likely splitting and distributing clock signals and envelopes with them.

A circuit that can be scaled up for mega-sized mults would be interesting too…

---

<div class="post-metadata">

**Author:** ![Sonosus](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/sonosus/32/13679_2.png) [@Sonosus](https://lookmumnocomputer.discourse.group/u/Sonosus)\
**Post date:** [May 2, 2021, 6:11pm UTC](https://lookmumnocomputer.discourse.group/t/multiple-buffered/3468/2 "2021-05-02T18:11:02Z")

</div>

There’s Sam’s buffered mult:

> **[STUFF - LOOK MUM NO COMPUTER](https://www.lookmumnocomputer.com/projects#/1161-buffered-multiple)**
>
> Click on the images for more info on the projects, this is a work in progress and will build on the pages as i go.

@CTorp also has a schematic/pcb(I think it’s this one anyway):

> **[CTorpin/SwitchedMult](https://github.com/CTorpin/SwitchedMult)**
>
> doepfer style switched multiple in kosmo format. Contribute to CTorpin/SwitchedMult development by creating an account on GitHub.

---

<div class="post-metadata">

**Author:** ![analogoutput](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/analogoutput/32/29663_2.png) [@analogoutput](https://lookmumnocomputer.discourse.group/u/analogoutput)\
**Post date:** [May 2, 2021, 6:23pm UTC](https://lookmumnocomputer.discourse.group/t/multiple-buffered/3468/3 "2021-05-02T18:23:50Z")

</div>

You may just get more “noise”! For clock signals and envelopes you may be able to get away with circuits that do not do well with 1 V/oct signals. For those you want gain to be unity, of course, but you also want it compatible with upstream and downstream modules. So for instance a multiple that has 1k output resistors outside the op amp feedback loop will lose 1% of signal amplitude when fed into a module with 100k input impedance. Which doesn’t sound like much but it’s 12 cents per octave mistuning, very definitely audible. Likewise if you have a 1 V/oct source with 1k output impedance feeding into a multiple with 100k input impedance, you again lose tuning accuracy. The LMNC multiple has 10M input impedance, which is more than enough — might actually be better to kick it down to 1M — and 100R output impedance. So should be good for V/oct signals. On the other hand, if you plug the wrong thing in and have a 12 V short across those 100R resistors that’s 1.44 watts, they’ll start smoking real fast…
