# Module requests

**URL:** <https://lookmumnocomputer.discourse.group/t/module-requests/39>\
**Category:** KOSMO MODULES\
**Created:** [January 19, 2020, 2:35pm UTC](https://lookmumnocomputer.discourse.group/t/module-requests/39 "2020-01-19T14:35:13Z")\
**Posts on this page:** 1\
**Showing post:** 228

<div class="post-metadata">

**Author:** ![fredrik](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/fredrik/32/682_2.png) [@fredrik](https://lookmumnocomputer.discourse.group/u/fredrik)\
**Post date:** [June 1, 2020, 5:37pm UTC](https://lookmumnocomputer.discourse.group/t/module-requests/39/228 "2020-06-01T17:37:13Z")

</div>

> [@lookmumnocomputer](#):
>
> also everything is buffered… so possibly???

Ok, I’d try ~~680 ohm~~ 270 ohm in series to get a small margin, and a 5k1 resistor + 5k trimmer in the divider, to put the right position near the center of the trimmer.

 ![image](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/2X/e/efc1687050d360b1bfa1b0e722ad29f08e4d48dd.jpeg)

(270 ohm gives you at least (11.5−10.6)/270 = 3.3 mA which is 1 mA for the TL431, 1.3 mA for the circuit, and 1 mA to spare. 330 ohm could work but then it’s getting a bit tight at 11.5 V)

EDIT: 220 ohm is probably better, since current is flowing through 5k+5.1k as well, see [here](https://lookmumnocomputer.discourse.group/t/1007-midimuso-midi-cv/1446/51).

---

_[View the full topic](https://lookmumnocomputer.discourse.group/t/module-requests/39)._
