# Midimuso on -12V

**URL:** <https://lookmumnocomputer.discourse.group/t/midimuso-on-12v/3849>\
**Category:** DIY STUFF\
**Created:** [August 4, 2021, 8:48pm UTC](https://lookmumnocomputer.discourse.group/t/midimuso-on-12v/3849 "2021-08-04T20:48:38Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![analogoutput](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/analogoutput/32/29663_2.png) [@analogoutput](https://lookmumnocomputer.discourse.group/u/analogoutput)\
**Post date:** [August 4, 2021, 11:36pm UTC](https://lookmumnocomputer.discourse.group/t/midimuso-on-12v/3849/5 "2021-08-04T23:36:49Z")

</div>

There’s some discussion here

> [@\#1007 midimuso midi-cv](https://lookmumnocomputer.discourse.group/t/1007-midimuso-midi-cv/1446/48):
>
> Okai, great, I will also try a 10uF EL then! Another thing: R26 is listed as 270 ohm on the BOM, but on the pcb it says 220 – 270. So, 270 is better, but 220 could work? Bit confused again laughing

about using 270R or 220R, nothing about going lower but it sounds like it might be worth a try in your case.

---

_[View the full topic](https://lookmumnocomputer.discourse.group/t/midimuso-on-12v/3849)._