# KOSMO Setup pics **URL:** \ **Category:** KOSMO MODULES\ **Created:** [February 21, 2020, 10:32am UTC](https://lookmumnocomputer.discourse.group/t/kosmo-setup-pics/294 "2020-02-21T10:32:51Z")\ **Posts on this page:** 1\ **Showing post:** 330
**Author:** ![analogoutput](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/analogoutput/32/29663_2.png) [@analogoutput](https://lookmumnocomputer.discourse.group/u/analogoutput)\ **Post date:** [December 8, 2020, 7:12pm UTC](https://lookmumnocomputer.discourse.group/t/kosmo-setup-pics/294/330 "2020-12-08T19:12:44Z")
I draw my panels in Inkscape, then either pull them into KiCad for FR4 fabrication, or print them to paper for use as drilling templates. I have an Inkscape doc I use as a template with common hole/component/knob sizes etc. as given here: > [@Kosmo Specification](https://lookmumnocomputer.discourse.group/t/kosmo-specification/896): > > Let’s try to capture what we know of the Kosmo standard in this Wiki to help people interface with Kosmo modules or design new Kosmo-compatible modules. Both electrical and mechanical information should be listed. This is a first draft, feel free to correct any error and add missing information. SPECIAL REQUEST: KiCad templates for front panels with mounting holes and example jack socket , trimmer and potentiometer holes would be greatly appreciated. ELECTRICAL Power Supply +12V, -12V r… --- _[View the full topic](https://lookmumnocomputer.discourse.group/t/kosmo-setup-pics/294)._