# KOSMO Setup pics **URL:** \ **Category:** KOSMO MODULES\ **Created:** [February 21, 2020, 10:32am UTC](https://lookmumnocomputer.discourse.group/t/kosmo-setup-pics/294 "2020-02-21T10:32:51Z")\ **Posts on this page:** 1\ **Showing post:** 327
**Author:** ![Caustic](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/caustic/32/15588_2.png) [@Caustic](https://lookmumnocomputer.discourse.group/u/Caustic)\ **Post date:** [December 8, 2020, 6:15pm UTC](https://lookmumnocomputer.discourse.group/t/kosmo-setup-pics/294/327 "2020-12-08T18:15:13Z")
If I’m just using some cheap recycled wood, (I get the cigar boxes that are thrown away at liquor stores they are fine with it) I just drill and eyeball after using a ruler. I have also used pcb fabrication to make front panels. See the threading this: > [@DIY Front Panels with PCB](https://lookmumnocomputer.discourse.group/t/diy-front-panels-with-pcb/121): > > Hi folks, I figured I would document my experiences with using PCB fabrication sites like JLCPCB. First, i had no clue where to start, not having any CAD software or anything. I settled on using EasyEDA since it interfaces with these PCB sites directly, but you can use others. This CAD software will generate a Gerber file, which is uploaded to the site for them to make for you. Here is a screen cap of my finished VCO panel I made in the CAD program: And here is a pic of the finishe… One thing I would add is adding a copper fill to give more rigidity. --- _[View the full topic](https://lookmumnocomputer.discourse.group/t/kosmo-setup-pics/294)._