# Is my stripboard layout correct ? (DIY Dub siren)

**URL:** <https://lookmumnocomputer.discourse.group/t/is-my-stripboard-layout-correct-diy-dub-siren/5873>\
**Category:** DIY STUFF\
**Created:** [January 24, 2023, 3:55pm UTC](https://lookmumnocomputer.discourse.group/t/is-my-stripboard-layout-correct-diy-dub-siren/5873 "2023-01-24T15:55:55Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Dud](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/dud/32/610_2.png) [@Dud](https://lookmumnocomputer.discourse.group/u/Dud)\
**Post date:** [January 24, 2023, 10:44pm UTC](https://lookmumnocomputer.discourse.group/t/is-my-stripboard-layout-correct-diy-dub-siren/5873/4 "2023-01-24T22:44:16Z")

</div>

Welcome to the forum 🙂  
I haven’t compared everything but quickly I think C5 is backward,  
and it lacks cutoff pads in several places, eg between the top LEDs legs (B12 & B16 on stripbord version), and between all the horizontal resistors/diode/cap legs (B20, B7, H19, L32)

here’s my [DIY Dub siren](https://lookmumnocomputer.discourse.group/t/siren-diy-bending-hack-drone/1300)

---

_[View the full topic](https://lookmumnocomputer.discourse.group/t/is-my-stripboard-layout-correct-diy-dub-siren/5873)._