# First PCB.. Synth clock

**URL:** <https://lookmumnocomputer.discourse.group/t/first-pcb-synth-clock/763>\
**Category:** DIY STUFF\
**Created:** [April 29, 2020, 7:28pm UTC](https://lookmumnocomputer.discourse.group/t/first-pcb-synth-clock/763 "2020-04-29T19:28:34Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![twinturbo](https://avatars.discourse-cdn.com/v4/letter/t/8baadc/32.png) [@twinturbo](https://lookmumnocomputer.discourse.group/u/twinturbo)\
**Post date:** [April 29, 2020, 7:28pm UTC](https://lookmumnocomputer.discourse.group/t/first-pcb-synth-clock/763/1 "2020-04-29T19:28:34Z")

</div>

So this is my first PCB since drawing, photo etching and bubble tanking back in the 80s at school.

I drew this electrical by hand, not using the schematic, net and router… I left one ground track off.

This is a first stab at the trigger clock I am building.

Apart from the missing track, the board is too long, and I have not accounted for the depth of the jacks. But it looks to work. There is the ability to cut down the board to fit.

I have 4 spare V1 boards like this if anyone wants one in the UK at cost…

Rob

---

<div class="post-metadata">

**Author:** ![jwotto](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/jwotto/32/1932_2.png) [@jwotto](https://lookmumnocomputer.discourse.group/u/jwotto)\
**Post date:** [April 29, 2020, 8:55pm UTC](https://lookmumnocomputer.discourse.group/t/first-pcb-synth-clock/763/2 "2020-04-29T20:55:20Z")

</div>

Wow good job dude! wished my first pcb looked like that 🙂

---

<div class="post-metadata">

**Author:** ![Caustic](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/caustic/32/15588_2.png) [@Caustic](https://lookmumnocomputer.discourse.group/u/Caustic)\
**Post date:** [April 29, 2020, 10:32pm UTC](https://lookmumnocomputer.discourse.group/t/first-pcb-synth-clock/763/3 "2020-04-29T22:32:12Z")

</div>

Noice. Glad to hear its working at least! Thats what matters.