# Cooling paste or

**URL:** <https://lookmumnocomputer.discourse.group/t/cooling-paste-or/8156>\
**Category:** Uncategorized\
**Created:** [April 11, 2026, 8:52pm UTC](https://lookmumnocomputer.discourse.group/t/cooling-paste-or/8156 "2026-04-11T20:52:53Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Marty](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/marty/32/30770_2.png) [@Marty](https://lookmumnocomputer.discourse.group/u/Marty)\
**Post date:** [April 11, 2026, 8:52pm UTC](https://lookmumnocomputer.discourse.group/t/cooling-paste-or/8156/1 "2026-04-11T20:52:53Z")

</div>

Hi guys

Im building another Thomas Henry VCO555 and im trying to make it as stable as possible in terms of temperature stabilization.  
My first VCO555, i soldered both transistors with the flat sides surfaces touching and used heatshrink tube connect them even thighter. On top of the two trannies i’ve put the 2k tempco resistor. I wished the resistor was flat instead of round so the heat from the trannies would transfer better to the tempco. My question is, can i use heat conductive paste to put onto the transistors and put the tempco in it for better heat transfer?

Thanks in advance for your advice

---

<div class="post-metadata">

**Author:** ![TBone](https://avatars.discourse-cdn.com/v4/letter/t/3ab097/32.png) [@TBone](https://lookmumnocomputer.discourse.group/u/TBone)\
**Post date:** [April 11, 2026, 9:33pm UTC](https://lookmumnocomputer.discourse.group/t/cooling-paste-or/8156/2 "2026-04-11T21:33:18Z")

</div>

Yeah

 ![1000003512](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/3X/7/8/788a8713cac94899cc407e3f8dc570dc9506857a.jpeg)

---

<div class="post-metadata">

**Author:** ![Marty](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/marty/32/30770_2.png) [@Marty](https://lookmumnocomputer.discourse.group/u/Marty)\
**Post date:** [April 12, 2026, 4:57am UTC](https://lookmumnocomputer.discourse.group/t/cooling-paste-or/8156/3 "2026-04-12T04:57:29Z")

</div>

Yeah​👍

Thats the one. Thanks for sharing. Can you send a drop or two?😁

Also, nice PCB. Here is mine

 ![20260411_215459](https://global.discourse-cdn.com/free1/uploads/lookmumnocomputer/original/3X/4/6/46f3412ac0b55aaad3396d0a74b4cd6b4fda64e2.jpeg)
