# Behringer Brains in Kosmo format? **URL:** \ **Category:** KOSMO MODULES\ **Created:** [December 11, 2022, 2:08am UTC](https://lookmumnocomputer.discourse.group/t/behringer-brains-in-kosmo-format/5741 "2022-12-11T02:08:12Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![d42kn355](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/d42kn355/32/273_2.png) [@d42kn355](https://lookmumnocomputer.discourse.group/u/d42kn355)\ **Post date:** [December 11, 2022, 11:36pm UTC](https://lookmumnocomputer.discourse.group/t/behringer-brains-in-kosmo-format/5741/3 "2022-12-11T23:36:22Z")
I made one for Braids a while back - I sent someone here on the forum the Gerbers for it, not sure if they ever made em or not. > [@Braids to KOSMO Conversion Panels - and a Question!](https://lookmumnocomputer.discourse.group/t/braids-to-kosmo-conversion-panels-and-a-question/706): > > Hey all! So I found the Braids Panel Dimensions and decided to make a Braids to KOSMO Conversion Panel. This Conversion with only require a couple things. 1: Desolder the original x6 3.5mm Jacks from the PCB (be sure to use solder wick to clean the holes) 2: Obtain 6 TruConnect (or TC Box Style) 1/4" Jack Sockets and pop them into the Conversion Panel 3: Wire all Corresponding Pins from the Jacks to the Board where the 3.5mm Jacks used to be. 4: Affix the Braids PCB to the back of the Conv… --- _[View the full topic](https://lookmumnocomputer.discourse.group/t/behringer-brains-in-kosmo-format/5741)._