# Behringer Brains in Kosmo format? **URL:** \ **Category:** KOSMO MODULES\ **Created:** [December 11, 2022, 2:08am UTC](https://lookmumnocomputer.discourse.group/t/behringer-brains-in-kosmo-format/5741 "2022-12-11T02:08:12Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![MeltedMind](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/meltedmind/32/21201_2.png) [@MeltedMind](https://lookmumnocomputer.discourse.group/u/MeltedMind)\ **Post date:** [December 11, 2022, 2:08am UTC](https://lookmumnocomputer.discourse.group/t/behringer-brains-in-kosmo-format/5741/1 "2022-12-11T02:08:12Z")
Has anyone considered creating a front panel that will allow the conversion of the Behringer Brains module from euro to Kosmo format? Could make a really cool and affordable Kosmo module! ---
**Author:** ![Kelaifu](https://avatars.discourse-cdn.com/v4/letter/k/46a35a/32.png) [@Kelaifu](https://lookmumnocomputer.discourse.group/u/Kelaifu)\ **Post date:** [December 11, 2022, 10:30am UTC](https://lookmumnocomputer.discourse.group/t/behringer-brains-in-kosmo-format/5741/2 "2022-12-11T10:30:52Z")
I’ve seen panels to mount euro into a kosmo rack before. IMO you may as well just have a euro sized full rail or a second small case if you are going down this route though. ---
**Author:** ![d42kn355](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/d42kn355/32/273_2.png) [@d42kn355](https://lookmumnocomputer.discourse.group/u/d42kn355)\ **Post date:** [December 11, 2022, 11:36pm UTC](https://lookmumnocomputer.discourse.group/t/behringer-brains-in-kosmo-format/5741/3 "2022-12-11T23:36:22Z")
I made one for Braids a while back - I sent someone here on the forum the Gerbers for it, not sure if they ever made em or not. > [@Braids to KOSMO Conversion Panels - and a Question!](https://lookmumnocomputer.discourse.group/t/braids-to-kosmo-conversion-panels-and-a-question/706): > > Hey all! So I found the Braids Panel Dimensions and decided to make a Braids to KOSMO Conversion Panel. This Conversion with only require a couple things. 1: Desolder the original x6 3.5mm Jacks from the PCB (be sure to use solder wick to clean the holes) 2: Obtain 6 TruConnect (or TC Box Style) 1/4" Jack Sockets and pop them into the Conversion Panel 3: Wire all Corresponding Pins from the Jacks to the Board where the 3.5mm Jacks used to be. 4: Affix the Braids PCB to the back of the Conv… ---
**Author:** ![MeltedMind](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/meltedmind/32/21201_2.png) [@MeltedMind](https://lookmumnocomputer.discourse.group/u/MeltedMind)\ **Post date:** [December 11, 2022, 11:54pm UTC](https://lookmumnocomputer.discourse.group/t/behringer-brains-in-kosmo-format/5741/4 "2022-12-11T23:54:46Z")
Hey man! It was me 🤣 Did you ever get the ones I mailed you? ---
**Author:** ![d42kn355](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/d42kn355/32/273_2.png) [@d42kn355](https://lookmumnocomputer.discourse.group/u/d42kn355)\ **Post date:** [December 12, 2022, 12:00am UTC](https://lookmumnocomputer.discourse.group/t/behringer-brains-in-kosmo-format/5741/5 "2022-12-12T00:00:31Z")
hmmm i think i did - lol i probably threw em in my KOSMO box already - meaning my box of 40+ unbuilt KOSMO modules lolololol, outta site outta mind so i forget what is around sometimes haha I forgot that was you 😃 ---
**Author:** ![Krakenpine](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/krakenpine/32/3263_2.png) [@Krakenpine](https://lookmumnocomputer.discourse.group/u/Krakenpine)\ **Post date:** [December 13, 2022, 7:27am UTC](https://lookmumnocomputer.discourse.group/t/behringer-brains-in-kosmo-format/5741/6 "2022-12-13T07:27:13Z")
I bought the Brains and planned to make a custom frontplate and remove jacks and wire 1/4" to their places, but it fit so well in my eurorack setup, that I’ll probably leave it there. Could also be a good idea to have even a one modular case that is filled and in theory can be used for live performances. But technically, is there any real problems why that conversion would not work if you don’t break anything when desoldering?