# Arduino 8 step sequencer

**URL:** <https://lookmumnocomputer.discourse.group/t/arduino-8-step-sequencer/2484>\
**Category:** DIY STUFF\
**Created:** [December 14, 2020, 7:47pm UTC](https://lookmumnocomputer.discourse.group/t/arduino-8-step-sequencer/2484 "2020-12-14T19:47:14Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![analogoutput](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/analogoutput/32/29663_2.png) [@analogoutput](https://lookmumnocomputer.discourse.group/u/analogoutput)\
**Post date:** [December 14, 2020, 8:16pm UTC](https://lookmumnocomputer.discourse.group/t/arduino-8-step-sequencer/2484/2 "2020-12-14T20:16:35Z")

</div>

See discussions starting here

> [@8-Step Arduino Sequencer](https://lookmumnocomputer.discourse.group/t/8-step-arduino-sequencer/467/76):
>
> Hmm, I think I read the recommendation is to power a Nano off 7-12V on the VIN pin. I think it’s OK to power it on the 5V pin from an external regulator. But the onboard regulator needs more than 5V in to get 5V out. But don’t take my word for it.

---

_[View the full topic](https://lookmumnocomputer.discourse.group/t/arduino-8-step-sequencer/2484)._