# Adding sync to 1145 stripboard layout

**URL:** <https://lookmumnocomputer.discourse.group/t/adding-sync-to-1145-stripboard-layout/5089>\
**Category:** KOSMO MODULES\
**Created:** [June 1, 2022, 6:13pm UTC](https://lookmumnocomputer.discourse.group/t/adding-sync-to-1145-stripboard-layout/5089 "2022-06-01T18:13:05Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Dud](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/dud/32/610_2.png) [@Dud](https://lookmumnocomputer.discourse.group/u/Dud)\
**Post date:** [June 2, 2022, 9:00am UTC](https://lookmumnocomputer.discourse.group/t/adding-sync-to-1145-stripboard-layout/5089/4 "2022-06-02T09:00:40Z")

</div>

Some here had some synchronization problem (including me), if so try this

_“A note, the switch to engage the sync only works when the Dist pot is at 10, then I can adjust it but to engage the sync it must be fully, a little strange but it is enough to know”_

[in this thread](https://lookmumnocomputer.discourse.group/t/my-build-progress/345/884)

---

_[View the full topic](https://lookmumnocomputer.discourse.group/t/adding-sync-to-1145-stripboard-layout/5089)._