# 1157 MINI ADSR Module **URL:** \ **Category:** KOSMO MODULES\ **Created:** [March 6, 2020, 7:08pm UTC](https://lookmumnocomputer.discourse.group/t/1157-mini-adsr-module/359 "2020-03-06T19:08:29Z")\ **Posts on this page:** 1\ **Showing post:** 59
**Author:** ![Caustic](https://yyz2.discourse-cdn.com/free1/user_avatar/lookmumnocomputer.discourse.group/caustic/32/15588_2.png) [@Caustic](https://lookmumnocomputer.discourse.group/u/Caustic)\ **Post date:** [June 25, 2020, 3:05am UTC](https://lookmumnocomputer.discourse.group/t/1157-mini-adsr-module/359/59 "2020-06-25T03:05:24Z")
So, per the dumbass thread: > [@A litany of dumbassery](https://lookmumnocomputer.discourse.group/t/a-litany-of-dumbassery/526/103): > > Tonight I decided to get around to makin the Kosmo ADSR. Everything went great, but at the last second i soldered the chip sockets in on the wrong side. Managed to de-solder the sockets, but now im going to have a hell of a time getting this sorted. It was going so well too! Anyone have any experience with this and maybe have some pointers? @fredrik? Im just glad i noticed before frying the damn ADSR chip. I managed to clean out the holes enough to put the chips in. Plugged it in and immediately unplugged. Thankfully, the first thing i test whenever there is a sketch build is: “does the op-amp get hot”? I dont plug in anything else until i rule that out. Thankfully, since after plugging this thing in, it was scorchy. Afterwards, i test continuity and everything seems to be connected per the schematic. Connectivity to ground, +12, -12 are where i expect them to be. I think i might just have to call this a loss. At first i thought i must have put the cursed opamp in backwards but it was not the case. Ill have to keep lookin’ and stuff, but given that i kinda botched the chip soldering by originally doing it on the wrong side and having to de-solder etc, i think its time to call it. 🙂 --- _[View the full topic](https://lookmumnocomputer.discourse.group/t/1157-mini-adsr-module/359)._